Filter
Top Products
44
♦ Press the
FNC
key to confirm old password. PSIII
displays:
♦ Key in password.
♦ Press the
FNC
key to enter the password.
♦ Key in password twice.
♦ Press the
FNC
key to confirm. PSIII displays:
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
To Cancel the Password:
♦ Press the
FNC
key →
3
→
7
→
4
. PSIII displays:
♦ Press the
FNC
key or
2
. For Mode 2* systems,
PSIII displays:
♦ Key in current password.
♦ Press the
FNC
key to confirm. PSIII displays:
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
NOTE: The Password has now been reset to:
0000.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
New Password?
New Password
Set
[
1
]Set
[2]Reset
Password
Password?
Password
Reset