Filter
Top Products
34
♦ Key in the access code to establish Call
Forwarding All Calls.
Example: *2=Call Forward-All, SET
♦ Press the
FNC
key to enter.
♦ Press the
FNC
key to confirm.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
To Set the Call Forwarding All Calls Cancel
Access Code:
♦ Press the
FNC
key →
3
→
5
→
3
. PSIII displays:
♦ Press the
FNC
key or
2
. For Mode 2* systems,
PSIII displays:
♦ Key in the access code to cancel Call Forwarding
All Calls.
Example: #2=Call Forward-All Cancel.
♦ Press the
FNC
key to enter.
♦ Press the
FNC
key to confirm.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
Access No?
[
1
]Set
[2]Reset
CFW ALL
Access No?