Filter
Top Products
30
♦ Select [2] Speaker Ring. PSIII displays:
♦ Select [2] Off, then press the
FNC
key or
2
to
disable speaker ring.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
S
TATION
R
ING
Allows you to assign ring patterns that tell users
whether an incoming call is from an internal or
external source.
To Change the Station Ring Pattern:
♦ Press the
FNC
key →
3
→
4
→
3
. PSIII displays:
♦ Select
L1
or
L2*
by using the
Scroll
T or
Scroll
S
keys. For Mode 2* systems, PSIII displays:
♦ Press the
Scroll
W or
Scroll
X keys or the number
key to select a different Station Ring Pattern.
♦ Press the
FNC
key to confirm.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
NOTE: The default Station Ring pattern is 1.
T
RUNK
R
ING
Allows you to assign ring patterns that tell users
whether an incoming call is from an internal or
external source.
To Change the Trunk Ring Pattern:
♦ Press the
FNC
key →
3
→
4
→
4
. PSIII displays:
Speaker Ring
[1]On
[2]Off
Speaker Ring
Off
[
1
]L1
[2]L2
STN Ring
STN Ring
1 2 3 4 5 6 7 8