Filter
Top Products
10
T
O
T
RANSFER
A
C
ALL
While you are speaking on the phone, the PSIII will
display:
NOTE: If Calling Party Name is not available then the calling
party number will appear in the display for Mode 2* systems.
♦ If you wish to transfer this call, press
TRF
key.
♦ You will now hear a special dial tone. Key in the
telephone number you wish to transfer the call to.
♦ Press
END/PWR
to complete the transfer. Your
PSIII will return to the standby state.
T
O
P
LACE
A
C
ALL
O
N
-H
OLD
(Mode 2* System Only)
While you are speaking on the phone, the PSIII will
display:
NOTE: If Calling Party Name is not available
then the calling party number will appear in the
display.
♦ Press
HOLD
to place call on-hold.
♦ Press
L1
or
L2*
again to retrieve the call from
hold.
T
O
U
SE
C
OURTESY
M
ODE
Courtesy mode enables a PSIII incoming call to
become silent and vibration.
To Enable Courtesy Mode:
♦ Press
CLEAR
key and hold it down for more than
two seconds. For Mode 2* systems, PSIII
displays:
To Disable Courtesy Mode:
♦ Press
CLEAR
key and hold it down for more than
two seconds.
NOTE: If DEFAULT SET or RESET ALL is invoked,
Courtesy Mode will be disabled.
95551212
L1
C.Cross
9555121
2
L1
Mode 1 Mode 2*
C.Cross
9555121
2
L 1
J. KRAUSER
L2:90000
L1:12345