Filter
Top Products
20
To Disable Incoming Call Vibration Notifica-
tion:
♦ Press the
FNC
key →
3
→
1
→
2
. PSIII displays:
♦ Select [2] Off, then press the
FNC
key or
2
.
S
ERVICE
A
LARM
Enables you to know when you are in an area without
service, or if the battery is running low.
To Turn On Service Alarm:
♦ Press the
FNC
key →
3
→
1
→
3
. PSIII displays:
♦ Select [1] On, then press the
FNC
key or
1
to turn
on Service Alarm for Mode 2* systems.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
To Turn Off Service Alarm:
♦ Press the
FNC
key →
3
→
1
→
3
. PSIII displays:
♦ Select [2] Off, then press the
FNC
key or
1
to turn
off Service Alarm for Mode 2* systems.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
Vibration
[1]On
[2]Off
[
1
]On
[2]Off
Service ALM
[
1
]On
[2]Off
Service ALM