Filter
Top Products
31
♦ Select
L1
or
L2*
by using the
Scroll
S
or
Scroll
T
key. For Mode 2* systems, PSIII displays:
♦ Press the
Scroll
W
or
Scroll
X or the number key to
select different Trunk Ring pattern.
♦ Press the
FNC
key to confirm.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
NOTE: The default Trunk Ring pattern is 2.
T
O
S
ET
C
ALL
F
ORWARDING
[Call Forwarding Busy]
Enables you to set the access code which is used to
establish call forwarding when your line is busy.
NOTE: Check with your system administrator for
the list of access codes.
To Set the Call Forwarding Busy Access Code:
♦ Press the
FNC
key →
3
→
5
→
1
. PSIII displays:
♦ Press the
FNC
key or
1
. For Mode 2* systems,
PSIII displays:
♦ Key in the access code to establish call forwarding
when busy.
Example: *3=Call Forward Busy, SET.
♦ Press the
FNC
key to enter.
♦ Press the
FNC
key to confirm.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
[
1
]L1
[2]L2
Trunk Ring
1 2 3 4 5 6 7 8
Trunk Ring
[
1
]Set
[2]Reset
CFW Busy
Access No?