Filter
Top Products
33
♦ Key in the access code to establish call forwarding
when call is not answered.
Example: *4=Call Forward Don’t Answer, SET.
♦ Press the
FNC
key to enter.
♦ Press the
FNC
key to confirm.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
To Set the Call Forwarding Don’t Answer Can-
cel Access Code:
♦ Press the
FNC
key →
3
→
5
→
2
. PSIII displays:
♦ Press the
FNC
key or
2
. For Mode 2* systems,
PSIII displays:
♦ Key in the access code to cancel Call Forwarding
Don’t Answer.
Example: #4=Call Forward Don’t Answer Cancel.
♦ Press the
FNC
key to enter.
♦ Press the
FNC
key to confirm.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
[Call Forwarding All Calls]
To set the access code to establish Call Forwarding
All Calls.
NOTE: Confirm your system administrator the
list of access codes.
To Set the Call Forwarding All Calls Access
Code:
♦ Press the
FNC
key →
3
→
5
→
3
. PSIII displays:
♦ Press the
FNC
key or
1
. For Mode 2* systems,
PSIII displays:
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
[
1
]Set
[2]Reset
CFW D/A
Access No?
[
1
]Set
[2]Reset
CFW ALL