NEC DS1000 Telephone User Manual


 
The first line of the display shows the currently
selected DND type.
3. Select the soft key for the DND type you want to select.
OR
Dial a digit (
0-3) for the DND type you want to select.
1 (or ) = Incoming outside calls blocked
2 (or ) = Incoming Intercom calls blocked
3 (or ) = All calls blocked
0 (or ) = Cancels DND.
If you are on a call (or anytime your phone is not
idle), pressing DND automatically enables DND for
all calls (type 3). If DND is enabled, pressing DND
automatically disables DND.
When DND types 2 or 3 are enabled, Intercom
callers hear DND tone and see “DO NOT DIS-
TURB” in their telephone’s display.
If you don’
t make an entry for 10 seconds:
- If DND is disabled, the system automatically
enables DND All Calls.
- If DND is enabled, the system automatically can-
cels DND.
Do Not Disturb at your Super Display Telephone
To enable or disable DND:
1. Do not lift the handset or press .
2. Press . You see:
OFF
ALL
ICM
EXT
Do Not Disturb
89
80000mfh08-01.qxd 12/10/04 3:20 PM Page 89