Filter
Top Products
To place a call over a line group (using a Line Group
Access Code or Line Group Routing):
1. Press .
2. Dial a Line Group Access Code (90-98).
Dial 90 for group 0, 91 for group 1, etc.
If you hear dial tone as soon as you dial 9, your
system has Line Group Routing. (A line group has
been automatically selected for you.)
If you have Store and Forward enabled, the sys-
tem will dial out your call 6 seconds after you dial
the last digit. To avoid waiting, dial # after dialing
your last digit.
3. Dial the outside number you want to call.
Toll Restriction may prevent you from dialing cer-
tain outside numbers.
If you use a dial pulse line and wait 6 seconds
after dialing a digit, the system outdials any remain-
ing digits as DTMF.
52
Central Office Calls, Placing
80000mfh08-01.qxd 12/10/04 3:20 PM Page 52