Filter
Top Products
5330/5340 IP Phones – User Guide
93
Auto Dial
When a Cordless Module is installed and at least one device is paired, the Auto Dial feature is
available in the Settings menu. You can program a number that is automatically dialed when a
cordless device hookswitch button is pressed.
To program an Auto Dial number:
1. Press Settings.
2. Press Auto Dial, and then press Edit Number.
3. In the on-screen keyboard, enter the autodial number (see Using the Dial Pad to Enter
Information).
4. Press Save.
5. Press Edit Label.
6. In the on-screen keyboard, enter the appropriate information.
7. Press Save and then press Close.
To disable Auto Dial:
1. Press Settings.
2. Press Auto Dial.
3. Press Disable Auto Dial. The Auto Dial settings you have programmed are maintained
when the feature is disabled.
4. Press Save.
• To re-enable, repeat steps 1 and 2 and then press Enable Auto Dial.
• To change Auto Dial information, press Edit Number and/or Edit Label.
• Press Save to save all changes.