Filter
Top Products
5330/5340 IP Phones – User Guide
58
Programming Float Keys
You program the Float Keys using the Settings application on the 5340 phone. You are able to
program the Float Keys essentially as a mirror of any of the lines programmed on the 48
programmable keys. The Float Keys reflect the state of those lines including indicators and
labels, and allows you to access those lines without having to navigate to the pages where those
keys may be displayed. Any answered floating line remains floating for the duration of the call,
regardless of the manner in which it was answered.
To enable float keys:
1. Press Applications.
2. Press Settings.
3. Press Float Keys.
4. Press Enable.
5. Press Save.
To program Float Keys using the Settings Application:
1. Press Applications.
2. Press Settings.
3. Press Programmable Keys.
4. Press one of the line keys that you want to appear on a Float Key. Use the Page Navigator
keys to move through the list of programmed lines if necessary. The Float Configuration
display appears.
5. Press a key corresponding to your desired float configuration (see figure below):
Float Immediate – configure the unanswered incoming call on the designated line to
appear at the Float Key immediately
Float after. . . – configure unanswered incoming calls to display on a Float Key
after a delay of up to 60 seconds
Do Not Float – configure unanswered incoming calls to never displayed on a Float Key
(this is the default setting)