Filter
Top Products
SX-200 General Information Guide
186 Revision A 50003510
Receive Only Extensions
An industry-standard telephone with this class of service (COS) option, can receive calls but
cannot originate calls. The industry-standard telephone may, however, originate calls and select
features specified in its COS after having received a call, and placed the call on hold by flashing.
Record a Call
Record a Call allows you to record both ends of a two-party conversation (internal or external
call) in progress at your set. The recorded conversation is stored in your voice mail mailbox.
This feature is a purchasable option.
Remote LAN Access
Remote LAN Access provides LAN access to the wide area network (WAN) for both incoming
and outgoing calls through LAN servers (for example, routers, bridges) using Mitel’s PRI
Gateway interface.
Reminder
This feature allows an extension user to program the telephone to ring at a particular time. This
can be used, for example, as an appointment reminder. You may program up to three timers
(in a 24-hour period) to occur once or to repeat daily. See Wakeups, page 189.
Resale Package
The resale package is a method of offering the system’s Automatic Route Selection (ARS)
“Least Cost Routing” facilities to external users requiring low cost Long Distance calling, much
like the offerings of other Common Carriers. DISA trunks are installed for external access to
the system. The external user dials one of the DISA trunks, enters a verified account code, and
dials the desired external number. The Direct to ARS feature can be used to route the caller
directly to ARS. This feature is a specialized application of the SX-200 EL/ML Automatic Route
Selection, Toll Control, and Verified Account Code features.
Ringer Control
Users of a SUPERSET telephone or an attendant console can adjust the volume of the ringing
telephone or console.
Ringing - Discriminating
This feature provides two different ringing cadences to allow a user to distinguish between
internal incoming calls (standard ringing) and external incoming or Attendant calls
(discriminating ringing). The system can also be programmed to provide discriminating ringing
for all calls.
Standard Ring 1 second on, 3 seconds off.
Discriminating Ring 0.4 seconds on, 0.2 seconds off,
0.4 seconds on, 3 seconds off.