Filter
Top Products
SX-200 General Information Guide
126 Revision A 50003510
Attendant Function Access
By pressing the console FUNCTION key and the ATT FUNCTION softkey, the Attendant can
access Attendant features including
• Abbreviated Dialing
• Alarm (read alarms)
• Application (To access CDE or maintenance)
• Bell On/Off (if enabled)
• Busy Out
• Call Forward
• Cancel All Callbacks
• Cancel All Call Forwarding
• DAY/NIGHT1/NIGHT2 Switching
• Do Not Disturb Setup and Cancel
• Flexible Night Service
• Forced Trunk Release
• Francais (French language prompts and messages on console)
• Guest Room functions (if enabled)
• Message Waiting Setup and Cancel
• Send Message
• Set Date
•Set Time
• Set Up Message
• Stations
• System Identifier
• Trunk Status/Access/Busy Out.
For more information about Attendant functions, refer to the individual feature descriptions in
this guide.
Attendant Hold Positions
The Attendant can place an extension or trunk on hold in one of eight HOLD positions. There
are four hold keys. HOLD1, HOLD2, and HOLD3 are for hold positions one through three.
HOLD4 is for hold positions four through eight. A call hold recall time of 10 to 240 seconds can
be programmed. The default is 30 seconds.