Filter
Top Products
SX-200 General Information Guide
172 Revision A 50003510
Internal Number Block
Blocks the number of the station/set on the display of SUPERSET 4000 telephone sets,
SUPERSET 400 telephone sets, and ONS/CLASS stations telephones on the same system.
Inward Restriction (DID)
An extension can be barred from receiving calls directly from DID trunks.
Language Change
This feature allows SUPERSET display telephones to display text and softkey prompts in a
different language.
Last Number Redial
This feature allows the Attendant Console and any telephone user to redial the last manually
dialed internal or external number with a single key operation.
Last Party Receives Dial Tone
This feature allows the last party left on a call, after the other party(s) hang up, to receive dial
tone and be able to dial. Normally, this party would receive silence and after 30 seconds be
locked out.
Line Lockout
The system locks out an extension if the extension goes off-hook and does not dial digits or go
back on-hook for a length of time. Lockout also occurs if the extension does not hang up at the
end of a call. In the locked-out state, the extension cannot originate or receive calls, and appears
busy to potential callers.
Line Preference
The Line Preference feature allows the system to automatically select which line is used when
the set goes Off-hook to originate a call. One of the following may be selected:
• Prime key
•CO Line Key
• CO Line Group Key
• Personal O/G Key
• Manual (user must press a line key to originate a call).
The user may override the line preference by pressing another line key prior to going Off-hook
for a call origination. This feature has no effect on the answering of calls.