Filter
Top Products
Unified Voice Messaging and Embedded Voice Mail User Guide
10
4. Press 1 to set up a primary cascade, or press 2 to set up an alternate cascade.
5. Press 1, and then enter the number (1 to 9) of the level that you want to program. Then
select one of the following options:
To send notifications to a phone number:
• Press 2, and then select one of the following options:
- Press 1 for an extension number, and then enter the number.
- Press 2 or an outside number, and then enter the number.
To send notifications to a pager:
• Press 1.
• Press 2.
6. Press 1 to save the setting.
7. Press 3, and then select one of the following:
• Press 1 for Monday through Friday.
• Press 2 for all days.
• Press 3 to select individual days. You are prompted to press numbers 1 to 7, which
correspond to the days Sunday through Saturday.
8. Press 2. Then enter the times you want the message notification to start and stop. Enter
the times as two digits for the hour and two digits for the minutes (for example, 0900 = 9:00
A.M.). If you are entering the time in a 12-hour format:
• Press 1 for A.M.
• Press 2 for P.M.
If you want to have 24-hour notification, program the starting and ending times to the same
time (for example, enter 0900 for the starting time and 0900 for the ending time).
9. Press 4. Then select one of the following options:
• Press 1 for all messages.
• Press 2 for priority messages only.
10. Press # or hang up to save the settings and exit.