Filter
Top Products
80
6.16 [voice] command
The voice command is associated with the voice codec setting information.
1. -print: display voice codec information and configuration.
2. -send: three voice packet size can be configured as 20 ms, 40 ms or
60 ms.(only 30 and 60 ms for G..723.1)
3. -priority: set codecs priority in order. Please notice that user can set
from 1 to 5 codecs as their need, for example, voice –priority g723 or
voice –priority g729 711a g711u means SIP Phone can support only
one codec or four codecs.
4. -volume: There are three types can be adjustable, voice volume, input
gain and DTMF volume. Voice volume means the volume user can
hear, input gain means the volume the other side can hear from SIP
Phone, DTMF means DTMF transmitting volume. (voice –volume
voice “value of volume”, voice –volume input “value of volume”,
voice –volume dfmt “value of volume”)
Note: It is for advanced administrator use only. Please ask your distributor
before changing any settings of this command.
6.17 [phone] command
1. -print: Print current call progress tone configurations (ring: ring