Filter
Top Products
34
The Answering Machine
(continued)
Setting the Time
The clock on the answering system starts when power is applied to the base. Follow
these steps to set the clock to the correct time.
1 Press MENU.
The system announces “Time” and
the current time. The message
counter displays the current numbers
( through ) indicating the day of
the week.
2 Press SKIP or REPEAT until the correct
day is announced. The numbers
through are displayed on the base.
3 Press SET/RINGER to select the day.
4 Press SKIP or REPEAT until you hear the correct hour setting. The numbers
through are displayed on the base as each hour is announced.
5 Press SET/RINGER to select the hour.
6 Press SKIP or REPEAT until you hear the correct minute setting. The numbers
through are displayed on the base as each minute is announced.
7 Press SET/RINGER to select the minute.
8 Press SKIP or REPEAT until you hear the correct AM or PM setting. The message
counter displays or .
9 Press SET/RINGER to select the AM/PM.
You hear a confirmation tone. The phone announces “Time” and the time and day
for your review. The base LED displays the number that corresponds with the day
of the week.
Notes
• Normally the idle time for the menu mode is 30 seconds before the system returns
to standby. However for setting the time, the idle time is extended to two minutes.
• Press and hold SKIP or REPEAT to quickly scroll through numbers on the display.
UC374BH(MPH6990) OM ENG 6/5/02 8:57 AM Page 34