Filter
Top Products
20
Memory Storing
(continued)
Steps for entering names and special characters
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following
order: Upper case letters first, lower case letters next and finally the number
corresponding to the key.
Number of times key is pressed
123456789
1
ABCabc2
DEFdef3
GHIghi4
JKLjkl5
MNOmno6
PQRSpqrs7
TUVtuv8
WXYZwxyz9
*#-&()(blank) 0
If you make a mistake while entering a name
Use
*
/
t
/TONE or #/
s
to move the cursor to the incorrect character. Press
DELETE/CHANNEL to erase the wrong character, then enter the correct character. To
delete all characters, press and hold
DELETE/CHANNEL.
For example, to enter Memorex:
1) Pick up the handset and press and hold
MEMORY.
2) Enter a number or press ▲, ▼ to select a memory location number.
3) Press
SELECT.
4) Press
6 once.
5) Press
3 five times.
6) Press
6 four times, then press #/
s
to move the cursor to the right.
Note
If the next character uses the same number key, you must press
#/
s
to move the cursor over. Otherwise the next time you press the number
key, it changes the character that was previously set.
7) Press
6 six times.
8) Press
7 seven times.
9) Press
3 five times.
10) Press
9 six times.
11) When finished, press
SELECT.
To continue to store the telephone number, proceed to step 6 on page 19.
keys
UC374BH(MPH6990) OM ENG 6/5/02 8:56 AM Page 20