Filter
Top Products
23
Memory Editing
Editing a stored name and/or phone number
1
Press and hold MEMORY until a tone sounds and
“
Memory Store” is displayed.
2 Press the ▲ or ▼ keys or number keypad to
select the memory location you would like to edit.
3 Press SELECT.
The following screen appears with the memory
location number that you have selected in
the display.
For example, if you selected memory location number 1,
the display shows memory 1 selected.
4 Press the ▲ or ▼ key to select "Edit Memory",
then press
SELECT.
The following screen appears. The cursor flashes
indicating that the display is ready for the name to
be edited.
When a name has not been stored, the cursor
appears at the beginning of the second line.
5 Press the number keys, #/
s
,
*
/
t
/TONE, or
DELETE/CHANNEL to edit the name. (See page 19.)
To edit only the phone number, skip this step.
6 Press SELECT.
The following screen appears. The cursor flashes
indicating that the display is ready for the number
to be edited.
7 Use the number keypad, #/
s
,
*
/
t
/TONE,
REDIAL/PAUSE or DELETE/CHANNEL key to edit
the phone number. The phone number cannot
exceed 20 digits. (See page 19.)
When the phone number is not to be edited, skip
this step.
8 Press SELECT.
The handset beeps and displays the confirmation
screen. The memory storage is complete.
For example if you store a name and number into
memory location number 1, the display shows
“
Memory 1 Stored”.
After about 2 seconds, “
Memory Store”
is displayed.
9 Press OFF to return to standby.
UC374BH(MPH6990) OM ENG 6/5/02 8:56 AM Page 23