Filter
Top Products
3
1. Basic description
1.1 Features
¾ Very slim module for surface mounting only. Supplied in 1, 2 or 4 button variants.
¾ Voice communication powered from analogue telephone line only.
¾ Pulse and tone (DTMF) dial
¾ Two 16 digits numbers saved under each button (includes *, #, RECALL and pause)
¾ DAY/NIGHT mode
¾ Call prolongation by dialling * or #
¾ Electrical (magnetic) lock compatible
¾ Code to hang up from phone
¾ Code to open the door by phone
¾ 3 different passwords for code lock (external code from buttons)
¾ Optional number of rings before picking up incoming call
¾ Optional time between code entry button-presses
¾ Optional delay time before redialling
¾ Optional time before dialling starts
¾ Optional parameters for DTMF tones, Recall and Pause duration
¾ 3 default levels
¾ Programming by remote control (DTMF) and by direct PC connection via USB cable (available
separately)
¾ Integrated heating of printed circuit (PCB) (option)
¾ Permanent lighting through visiting cards (option)
¾ Earthing outlet for better protection against static electricity
¾ Switchable audible confirmation tones
1.2 SlimDoorPhone models
Three versions are available :
1 button 2 buttons 4 buttons
2 Installation
This compact unit is fixed by 2 screws to the wall.
2.1 Opening, wiring, wall mounting and settings
2.1.1 Name card panel
1. Every unit is supplied with a special key which is used to release
the name cards on the front panel. Push the key into the hole in
the speaker grille
(see figure - 1).
2. Push the name card panel down and then push it towards to
grille (see figure-2).
3. The panel will be released. Pull it towards you to remove (see
figure – 3).