Filter
Top Products
12
5.3 Basic parameters
Parameter Value Description Default Exam.1 Exam.2
41 v
Dialling type
0 0 0
v – dial type
v=0 is DTMF tone dial, v=1 is pulse dial
Parameter Value Description Default Exam.1 Exam.2
42 z
Prolong call
∗ ∗ ∗
z – button for call prolongation ∗ or # (10 sec before Maximum Call Duration the unit will emit a tone.
Pressing this button will prolong the call)
Parameter Value Description Default Exam.1 Exam.2
43 bb
End call
55 55 55
bb – command for unit hanging up from phone [2 digits]
It is recommended to set the same command for both Internal Access Code (parameter 35) and End Call
aa=bb.
Parameter Value Description Default Exam.1 Exam.2
44 xxxx
Password
0000 0000 0000
xxxx – service password for entry to programming
Parameter Value Description Default Exam.1 Exam.2
45 dd
DAY MODE switching
11 11 11
46 nn
NIGHT MODE switching
10 10 10
dd – command for DAY MODE switching [2 digits]
nn – command for NIGHT
MODE switching [2 digits]
Note: The switchover to Day/Night mode remains set in unit even after line disconnection.
Parameter Value Description Default Exam.1 Exam.2
47 e
Dialling mode
1 1 0
e – operating mode of unit
e=0 selects 2-Group mode, e=1 selects Day/Night mode.
5.4 Time parameters
Parameter Value Description Default Exam.1 Exam.2
51 q
Number of rings before
pick-up
2 1 2
q – Number of incoming call rings before a call is picked up. The number can be set from 1 to 9.
Parameter Value Description Default Exam.1 Exam.2
52 d
Maximum call duration
2 1 4