Filter
Top Products
15
Constant Modes (Continued)
Monitor Mode
Monitor Mode is typically used for
monitoring a baby or other sounds
in a room. When a room or patio
station is set to Monitor Mode, the
station’s microphone is always on.
Set other stations to Listen Mode
(see below) to hear sounds from any
station(s) set to Monitor Mode.
To enter or exit Monitor Mode,
press the station’s MUTE and TALK
buttons together. In Monitor Mode,
the station’s TALK button lights.
The station can still perform regular
intercom communications while in
Monitor Mode.
Listen Mode
When a room or patio station is
set to Listen Mode, the station’s
speaker is always on. Set a station
to Listen Mode to hear all stations
set to Monitor Mode.
Also, if the optional audio input
wall plate has been installed, set a
station to Listen Mode to play the
audio source connected to the wall
plate.
To enter or exit Listen Mode, press
the station’s MUTE and LISTEN
buttons together. In Listen Mode,
the station’s LISTEN button lights.
The station can still perform regular
intercom communications while in
Listen Mode.
TO SELECT LISTEN
MODE FOR THE STATION,
PRESS THE MUTE AND
LISTEN BUTTONS TOGETHER
SET OTHER STATIONS TO
MONITOR MODE TO HEAR
THEM USING LISTEN MODE
WHEN THE STATION IS IN
LISTEN MODE, THE LISTEN
BUTTON WILL STAY LIT
TO EXIT LISTEN MODE,
PRESS THE MUTE AND LISTEN
BUTTONS TOGETHER
LISTEN MODE CAN ALSO BE
USED TO PLAY AUDIO FROM
THE AUDIO WALL PLATE
Figure 29. Listen Mode
TO SELECT MONITOR MODE
MODE FOR THE STATION,
PRESS THE TALK AND MUTE
BUTTONS TOGETHER
SET OTHER STATIONS
TO LISTEN MODE TO
HEAR SOUNDS FROM
STATIONS IN MONITOR
MODE
WHEN THE STATION IS IN
MONITOR MODE, THE
TALK BUTTON WILL
STAY LIT
TO EXIT MONITOR MODE,
PRESS THE TALK AND MUTE
BUTTONS TOGETHER
Figure 30. Monitor Mode
NOTE: For silent, uninterrupted
monitoring at the room station in
Monitor Mode, set the station’s
volume all the way down.
NOTE: On Patio stations, press
MUTE and VOL
↑
to enter or exit
Listen Mode.