Linear DMC-10H Intercom System User Manual


 
12
General Operation (Continued)
Room to Room and Room to Patio Communications
A typical use for the system is to communicate between room stations
throughout the installation and to patio stations.
Talk Button
To communicate with other people
at room or patio stations, press and
hold the room station’s TALK button
while speaking. Release the TALK
button to listen to all other room
and patio stations for 25 seconds
(except stations in Privacy Mute or
Do-not-disturb Modes). Press and
hold the TALK button again at any
time to continue talking, after the
TALK button is released, the listening
time will be extended another 25
seconds.
Hands-free Reply Direction
Either person can change the
direction of the hands-free
conversation by pressing and
holding their TALK button while
speaking. After any TALK button is
released the other person will be
able to reply hands-free during the
25 second listening period (except
after a TALK button has been pressed
on a patio station).
Mute Button
To cancel the communication session
at any time before the 25 second
listening period expires, press the
MUTE button.
PRESS AND HOLD THE
TALK BUTTON WHILE SPEAKING
TO THE OTHER STATIONS
RELEASE THE TALK BUTTON
TO LISTEN TO THE OTHER
STATIONS
Figure 22. Room Station Talk Button
PRESSING THE MUTE BUTTON
ANYTIME DURING LISTENING
STOPS THE INTERCOM
SESSION
Figure 24. Room Station Mute Button
AFTER RELEASING THE TALK
BUTTON, THE ROOM STATION
WILL LISTEN TO ALL OTHER
ROOM AND PATIO STATIONS
FOR 25 SECONDS
OTHER STATIONS SET TO PRIVACY MUTE MODE OR
DO-NOT-DISTURB MODE WILL NOT BE MONITORED
Figure 23. Hands-free Reply