Filter
Top Products
9
Installation (Continued)
Hub Options
The intercom hub has two banks of
dipswitches. One bank enables or
disables each door station’s door
release
button. The other bank
enables or disables each door or
patio station’s privacy mute and do-
not-disturb feature.
Select the options appropriate for
the installation. The numbers on the
dipswitches correspond to the hub’s
station numbers. Mark the switch
settings in the log on Page 17.
Hub Power Supply Connection
The switching power supply module
included with each hub powers the
hub and all stations connected to
it. If an expansion hub is used, it
requires its own power supply.
Place the power supply in the
enclosure with the hub. Insert the
power supply output plug into the
hub’s POWER jack. Insert the power
supply’s power cord into the 117 VAC
outlet installed in the enclosure.
Hub Status Indicators
When the hub powers up, a
diagnostic check is run for all the
stations connected. On the hub, the
green indicator above the station’s
connector will light and stay lit for
all stations that pass the diagnostic
check (also for the optional expansion
hub). If any hub indicators do not
light, check the wiring associated
with that connector.
The diagnostic check only occurs
when power is applied to the hub.
To perform the diagnostic check at
any time, cycle the hub power off
then on again.
F
F
O
N
O
N
F
F
SWITCH NUMBERS 1-8 MATCH
THE STATION NUMBERS 1-8
MUTE SWITCH
DOOR RELEASE SWITCH
STATIONS WITH SWITCHES
THAT ARE "ON" WILL BE
ABLE TO USE PRIVACY
MUTE MODE
STATIONS WITH SWITCHES
THAT ARE "ON" WILL BE
ABLE TO ACTIVATE THE
DOOR RELEASE RELAY
Figure 13. Hub Option Switches
Figure 15. Hub Status Indicators
2
INTERCOM HUB
STATION STATUS
INDICATORS
EACH TIME POWER
IS APPLIED TO THE
HUB, THE HUB CHECKS
THE STATUS OF ALL
CONNECTED STATIONS
THE STATION STATUS
INDICATORS WILL LIGHT
FOR EACH STATION
(AND EXPANSION HUB)
THAT CHECKS OK
Figure 14. Power Supply Connections
PLUG POWER SUPPLY INPUT
INTO 117 VAC OUTLET
PLUG POWER SUPPLY OUTPUT INTO
THE INTERCOM HUB'S POWER CONNECTOR
POWER
SUPPLY
BUNDLE EXCESS
POWER SUPPLY
CABLES