Filter
Top Products
30
Inter-Tel
®
Model 8560/8660 User Guide
GETTING STARTED
FORWARDING CALLS
With the Forwarding feature, you can have calls follow you (e.g., forwarded to a cell
phone), or you can redirect calls to a voice mail or other extension.
Manual Call Forwarding
Manual call forwarding allows you to send incoming calls to another extension num-
ber. You can even forward calls to outside numbers, if your endpoint is programmed
to allow this.
To forward calls:
1. Press and then press one of the following menu buttons:
• ALL: All incoming calls are forwarded without ringing at your endpoint.
• NO ANSWER: All incoming calls are forwarded if they are not answered
before a timer expires.
• You cannot adjust this timer. Only the installer or system administrator can.
• BUSY: When your endpoint is busy, all incoming calls are forwarded with-
out ringing at your endpoint.
• NO ANSWER/BUSY: All incoming calls are forwarded if your endpoint is
busy or if you do not answer, as described above.
2. Do one of the following:
• To forward to an outside telephone number:
– Press the
OUTSIDE PHONE menu button.
– Dial a telephone number or press the
OUTSIDE DIR menu button to look
up and select a number. (See page 70 for more information on directo-
ries.)
• To forward to an extension number: Dial the extension number. OR, press
the
IC DIRECTORY menu button to look up and select a number.
• To forward to your voice mailbox: Press the
VOICE MAIL menu button.
• To forward to your message center: Press the
MESSAGE CENTER menu
button.
To cancel any call forward request:
EITHER, Press and then press the FWD OFF menu button.
OR, Dial any one of the forwarding feature codes and then press
.
Automatic System Forwarding
Automatic System Forwarding allows your system administrator to route calls based
on the type of call and the status of your telephone. Although you cannot program the
path of a system forward, you can enable or disable this feature on your endpoint.
To enable or disable System Forwarding:
Dial
.
FWD
FWD
3 5
4