Filter
Top Products
Kyocera KI-G100 GSM Handset - Ver.
0.3 Preliminary Version - 01.1999
21 Text
1 Read new read all unread message(s) that have been received:
• Scroll in the message with
(5 6)
• Press (Menu) to access the Message Menu and select
1 Read Next (appears only if there is at least one other to read)
2 Edit to edit the message (see next section)
3 Reply to reply to the message’s sender (see next section)
5 Extract to extract the number included in the message
6 Erase to erase the message
7 Info to display additional information about this message
2 Read all read all messages: same procedure as above
3 Create write a new message:
• Enter a message (max. 160 characters)
- To enter a letter, press a key several times until the desired
letter appears (see keypad allocation page 29)
- Use (A/a) to toggle between upper- and lowercase
- If you make a mistake, use the (Clear) key:
- short press: clear the last character
- long press: clear the complete entry
• Press (OK) and enter a destination number
• to access the Create Message Menu and select:
1 Save to save the message first
2 Send to send the message first
4 Settings changing of message control settings:
1 Msg Centre tel no. of the network unit which routes the messages
2 Reply Path let the answer to your message be prepaid
3 Valid per set the validity duration for not transmitted message
22 Broadcast
1 Read new read unread message(s) sent by the network
• Scroll in the message with
(▲ ▼)
• Press (Menu) to access the Message Menu and follow the same
procedure as in previous section
2 Read all read all messages: same procedure as above
3 Configuration select the type and language of the messages to be
Menus
17