Kyocera KI-G100 Telephone User Manual


 
Kyocera KI-G100 GSM Handset - Ver.
0.3 Preliminary Version - 01.1999
2. Your First Call
PULL UP THE ANTENNA
Your KI-G100 phone is equipped with an extendable antenna. It is normally
possible to make or receive calls with the antenna in, but better quality is
obtained with the antenna extended.
Fully extend the antenna before making or receiving a call. Never hold or
touch it during the call.
Push the antenna in only after the call has ended.
TO MAKE A CALL
Before dialling a number, make sure that the coverage is sufficient, - a network
name is displayed and there are at least 2 bars on the signal strength indicator.
In case of poor coverage conditions, the reception quality may be improved by
changing location (e.g. in a building move near to a window).
Dial a telephone number, including the full area
code, even if you are making a local call.
If you make a mistake, use the
(Clear) key:
- short press: clear the last digit
- long press: clear the complete number
Press (Call) or to make the call
021599183
96
Call Save
TO RECEIVE A CALL
The phone is ringing, the red light on top of the
phone is blinking and “Incoming Call” is displayed:
Press (Answer), or hold down the
key to answer the call
Incoming
Call
A
nswer
Note: while the phone is ringing, you can use the Rocker Key
(5 6) to
adjust the Ring volume.
Your First Call
6