Filter
Top Products
Introduction The Handset
2
2.4.2 Function Buttons
The Function buttons, as shown above, enables the user to
enter the menu system of the transceiver and change
various settings. Each button is described in detail below.
Some of the function buttons have a 2nd function shown in
italics at the upper right corner of the function button. To
use this 2nd function of a function button, press the "2nd"
button and then press the function button.
Key Function
This key has two functions.
1) If system is ‘ON’, this key will either –
by a single press - enter the top level
of the menu system (see section 4.3
Menu System) or – by holding down
for about 5 sec. - power down the
system.
2) If system is ‘OFF’, this key will force
16 May 2005