Filter
Top Products
32
Desk phone adapter microphone level
This setting is only shown if a phone adapter is connected.
The level of sound sent by phones to the receiving party varies between the different
makes. It may be necessary to adapt the microphone level to the telephone in order to
adapt this sound level so that the Konftel 55W provides optimal performance and the
other participants enjoy quality sound.
The setting is saved in the Konftel 55W and is used each time a phone is connected via
the phone adapter.
Activate and make a test call with your phone.
Open the Connection setting in the menu and adjust the outgoing sound until you
find the optimal level.
When speaking directly into your phone, use the sound as a reference level.
If the other party finds it hard to hear the sound, try increasing the level of the
outgoing sound from 0 to +1 or +2.
If the other party finds the sound loud but distorted, try decreasing the level of the
outgoing sound from 0 to -1 or -2.
Mobile phone microphone level
This setting is only shown if a mobile phone is connected with a cable.
The level of sound sent by mobile phones to the receiving party varies between the
different makes. It may be necessary to adapt the microphone level to the mobile
telephone in order to adapt this sound level so that the Konftel 55W provides optimal
performance and the other participants enjoy quality sound.
The setting is saved in the Konftel 55W and is used next time a mobile phone is
connected. Note that since the levels can vary from one make to another, it may be neces-
sary to make a new adjustment when other mobile phones are connected.
The basic setting 0 works satisfactorily for most mobile phones, but this setting allows
you to fine tune the sound.
Activate and make a test call with your mobile phone connected to the Konftel 55W.
Open the Connection setting in the menu and adjust the outgoing sound until you
find the optimal level.
When speaking directly into your mobile phone, use the sound as a reference level.
If the other party finds it hard to hear the sound, try increasing the level of the
outgoing sound from 0 to +1 or +2.
If the other party finds the sound loud but distorted, try decreasing the level of the
outgoing sound from 0 to -1 or -2.
SETTINGS