Filter
Top Products
13
Practically all mobile phones have Bluetooth and can be used for wireless communica-
tion with the Konftel 55W. Bluetooth must be activated in the mobile phone's settings.
Note that it is also possible to connect to certain desktop phones and computers with
Bluetooth, but these may not have support for dialling numbers, for example, from the
screen on the Konftel 55W. Also see “Connecting a phone with Headset Profile” on page 21.
OmniSound
®
HD performs over the full audio bandwidth (100–24000 Hz), but limita-
tions in the telecommunications networks and in Bluetooth technology reduce the
bandwidth somewhat and the sound is compressed. This has an effect on the sound
quality.
Note that Bluetooth in the Konftel 55W can be turned off. If no button is marked on
the display screen, open the settings and activate Bluetooth.
PAIRING AND CONNECTING
Two devices have to be paired before they can communicate with Bluetooth. They can be
paired from the Konftel 55W and from your mobile phone.
Note that a conflict may arise if you try to pair from both devices at the same time. We
recommend searching from one device only.
You must know the names of the devices that you want to pair in case there are lots of
active Bluetooth devices nearby. The name of your Konftel 55W can be changed in the
settings.
Turn Bluetooth on in your mobile.
This normally makes the phone visible to other Bluetooth devices and even starts a search on
some phones.
Press the button on the Konftel 55W to open the dialogue box with paired devices.
This makes the Konftel 55W visible to other Bluetooth devices.
USING THE KONFTEL WITH BLUETOOTH