Filter
Top Products
30
31
SETTINGS SETTINGS
CHECKING STATUS
The status menu can be used for troubleshooting. Only the administrator is able to
change these settings. See “Installation and Administration of Konftel 300IP” for an
explanation of the settings.
Account 1
To check account settings for SIP account 1.
Select MENU > STATUS > ACCOUNTS > ACCOUNT 1 (7,1,1).
This shows the status for:
- ACCOUNT NAME
- STATUS
- REGISTRAR
- SIP ID
- AUTH.NAME
- REALM
- PROXY
Account 2
To check account settings for SIP account 2.
Select MENU > STATUS > ACCOUNTS > ACCOUNT 2 (7,1,2).
Shows the same information as the menu option above.
Transfer protocol
To check which protocol is used to transmit data packages over the network.
Select MENU > STATUS > ACCOUNTS > TRANSPORT (7,1,3).
Current protocol is displayed.
Network
To check which protocol is used to transmit data packages over the network.
Select MENU > STATUS > NETWORK (7,2).
This shows the status for:
- DHCP
- IP ADDRESS
- HOSTNAME
- DOMAIN
- NETWORK
- GATEWAY
- DNS 1
- DNS 2
- VLAN
NAT Traversal
To check whether address conversion is activated, which may be necessary if the phone
is behind a rewall.
Select MENU > STATUS > NAT TRAVERSAL (7,3).
This shows the status for:
- STUN
- TURN
- ICE
Media
To check priorities of audio codecs and DTMF signalling.
Select MENU > STATUS > MEDIA (7,4).
This shows the status for:
- CODEC PRIORITY
- VAD
- DTMF SIGNALLING
- SECURITY RTP
- SECURE SIGNALLING
Time
To check time servers and time zones.
Select MENU > STATUS > TIME (7,5).
This shows the status for:
- NTP
- NTP SERVER
- TIMEZONE
Equipment
To check the phone’s serial number and software version.
Select MENU > STATUS > DEVICE (7,6).
This shows the status for:
- KONFTEL 300IP (software version and date)
- SERIAL NUMBER
- MAC ADDRESS