Filter
Top Products
24
25
DELETING A RECORDING
Select MENU > RECORDING > ERASE FILE (4,3).
Mark the folder you want and press OK.
Mark the recording to be deleted and press OK.
Conrm that you really want to delete the recording by pressing OK again, or cancel
the deletion of a recording by pressing C.
DELETING ALL RECORDINGS
Select MENU > RECORDING > ERASE ALL (4,4).
Conrm that you really want to delete all recordings by pressing OK again, or cancel
the deletion of a recording by pressing C.
ADJUSTING THE RECORDING INDICATOR
A short beep is heard every 20 seconds so that all the parties in the call know it is
being recorded. This feature can be turned off.
Select MENU > RECORDING > SETTINGS (4,5).
Select your choice and press OK to conrm.
DISPLAYING RECORDING FEATURE STATUS
Select MENU > RECORDING > STATUS (4,6).
The display screen indicates the number of recordings, the total length of recorded calls and
how many hours of recording time are left before the memory card is full.
RECORDING
The Konftel 300IP has two groups of settings: Basic and Advanced. You must enter the
Admin. PIN code to access the advanced settings.
The simplest way to make settings is using a PC and the Konftel 300IP web inter-
face (see page 32).
BASIC SETTINGS
Select default account
If the phone has two registered accounts, you can choose one of them as default.
Select MENU > SETTINGS > BASIC > ACCOUNTS (5,1,1).
Select ACCOUNT 1 or ACCOUNT 2 and press OK to conrm.
The account name is displayed. NOT CONFIGURED will be displayed if the selected account is
not registered.
Selecting languages
Select MENU > SETTINGS > BASIC > LANGUAGE (5,1,2).
Select the language you want and press OK to conrm.
Deactivating keypad tones
You can select whether or not you want a tone to be heard when you press a button.
Note that this setting does not affect the tone you hear when you dial a number in call
mode.
Select MENU > SETTINGS > BASIC > KEY TONE (5,1,3).
Select your choice and press OK to conrm.
Adjusting ring level volume
Select MENU > SETTINGS > BASIC > RING LEVEL (5,1,4).
Select your choice and press OK to conrm.
There are six volume levels plus a silent mode. You will hear the ring tone for each
level you select. If you select silent mode, an LED on the phone ashes when an
incoming call is received.
Adjusting sound (equaliser)
The sound reproduction can be adjusted to the required pitch (SOFT, NEUTRAL and
BRIGHT).
Select MENU > SETTINGS > BASIC > EQUALIZER (5,1,5).
Select your choice and press OK to conrm.
SETTINGS