Filter
Top Products
4
english
JABRA BT2080
Instruction Duration of press
Tap Press briey
Press Approx: 1 second
Press and hold Approx: 5 seconds
CHARGe YoUR HeADset
Make sure that your headset is fully charged for two hours before
you start using it. Use the AC power supply to charge from a
power socket. When the battery indicator has a solid red light,
your headset is charging. When the headset is fully charged the
battery indicator turns solid green for ve minutes and is then
turned o.
Use only the charger provided in the box - do not use chargers
from any other devices as this may damage your headset.
Please note: The lifetime of the battery will be signicantly reduced
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.
tURnInG YoUR HeADset on AnD oFF
To turn on your headset please press the ON/OFF button for
2 seconds until both indicators ash on the Jabra StatusDisplay™.
PAIRInG It WItH YoUR PHone
Headsets are connected to phones using a procedure called
‘pairing’. By following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
1 Put the headset in pairing mode
- When you turn on your Jabra BT2080 for the rst time, the
headset will automatically start up on pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the Bluetooth status indication on the StatusDisplay™ is
ashing.