Jabra BT2080 Bluetooth Headset User Manual


 
4
english
JABRA BT2080
Instruction Duration of press
Tap Press briey
Press Approx: 1 second
Press and hold Approx: 5 seconds
CHARGe YoUR HeADset
Make sure that your headset is fully charged for two hours before
you start using it. Use the AC power supply to charge from a
power socket. When the battery indicator has a solid red light,
your headset is charging. When the headset is fully charged the
battery indicator turns solid green for ve minutes and is then
turned o.
Use only the charger provided in the box - do not use chargers
from any other devices as this may damage your headset.
Please note: The lifetime of the battery will be signicantly reduced
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.
tURnInG YoUR HeADset on AnD oFF
To turn on your headset please press the ON/OFF button for
2 seconds until both indicators ash on the Jabra StatusDisplay™
PAIRInG It WItH YoUR PHone
Headsets are connected to phones using a procedure called
‘pairing’. By following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
1 Put the headset in pairing mode
- When you turn on your Jabra BT2080 for the rst time, the
headset will automatically start up on pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the Bluetooth status indication on the StatusDisplay™ is
ashing.