Filter
Top Products
4
Inter-Tel
®
Model 8600 User Guide (ITP Mode)
FINDING YOUR WAY
Feature Button Functions
The feature buttons are designed to automate some of the commonly used functions,
such as dialing an outside number. Each of these is described in the table below.
In addition to the buttons identified in the preceding table, your endpoint has a Spe-
cial button ( ). Depending on how your telephone system is configured, you may
need to press this button before you dial a feature code. Consult your system adminis-
trator if you have questions about how your system is configured.
Message Indicator Lamp
The Message Indicator lamp (located at the top, right corner of the endpoint) shows
the same indications as the button. The Message Indicator lamp flashes when-
ever there is a waiting message.
NOTE: By default, the message lamp is programmed to light when you receive a new
voice mail message. However, this lamp can be programmed for other functions. Check
with your system administrator if you are unsure what your endpoint’s lamp is pro-
grammed to indicate.
BUTTON IF YOU... YOU CAN... PG.
Press Answer a call.
19
Press the low or high end of the volume button Adjust volume during a call.
42
Press (International Hold Symbol) Put a call on hold.
22
Press and dial the destination number Transfer a call.
24
Press and dial the numbers you would
like to add to the conference
Place a conference call.
23
Press Leave or listen to a message.
29
Press and dial the destination number Forward calls to the specified
number.
26
Press unlit or lit Enable/disable Do-Not-Disturb
mode.
38
XFR
XFR
CNF
CNF
MSG MSG
FWD FWD
DND
DND
MSG