Filter
Top Products
27
Inter-Tel
®
Model 8600 User Guide (ITP Mode)
GETTING STARTED
Automatic System Forwarding
Automatic System Forwarding allows your system administrator to route calls based
on the type of call and the status of your telephone. Although you cannot program the
path of a system forward, you can enable or disable this feature on your endpoint.
To enable or disable System Forwarding:
Dial
.
Redirect Call
The Redirect Call feature allows you to forward any call that is ringing on your end-
point without having to answer the call.
NOTE: You cannot redirect calls to an extension that is in DND or to a restricted out-
side number.
To redirect a call to an extension number:
1. Press and dial .
2. Dial the extension number.
To redirect a call to an outside telephone number:
1. Press and dial .
2. Enter the outside telephone number.
3. Press .
REDIALING A NUMBER
The redial feature allows you to redial the last outside number you dialed. Although
most endpoints redial the last number dialed, your system administrator can program
your endpoint to redial the last number saved.
To use the Last Number Dialed feature (if enabled):
Lift the handset and dial
. A line is selected automatically, and the number
is dialed.
To use the Last Number Saved feature (if enabled):
• To save the last number dialed: While the endpoint is idle or while listening to
intercom dial tone, dial
.
• To redial the saved number: After selecting a line, dial
. The number
is dialed automatically.
3 5
4
3 3
1
3 3
1
#
3
8
0
3
8
0
3
8
0