Filter
Top Products
19
Inter-Tel
®
Model 8600 User Guide (ITP Mode)
GETTING STARTED
If there is no answer or if the endpoint is busy when you place an intercom call,
you can do any of the following:
• To leave a station message: Press and then hang up.
• To leave a voice mail message: Press and wait for the message center to
answer. (See page 29 for more message options.)
NOTE: This option is only available if the called endpoint has a voice mailbox.
• To camp onto a busy extension: Stay on the line and wait for the endpoint to
become available. Do not hang up. After the system timer expires, you hear
music until the endpoint is available.
NOTE: You cannot camp on to an endpoint if it is in DND mode.
• To request a callback (queue on to the endpoint): Press and hang up. When
the endpoint is available, your endpoint rings. (To cancel the queue request
before the callback, press
.)
Receiving Intercom Calls
Your endpoint can receive both intercom and non-handsfree intercom calls. If the
handsfree feature is enabled on your endpoint, intercom calls are automatically
answered, however you must pick up the handset to reply to the caller. Non-handsfree
intercom calls (see page 18) override the handsfree option.
To enable or disable your endpoint’s handsfree answering feature:
With the handset in the cradle, dial
.
To receive an intercom call:
If the handsfree feature is enabled, the call is automatically answered, but you must
lift the handset to respond to the caller.
If the handsfree feature is disabled, you can press to answer a call, but you must lift
the handset to respond to the caller.
NOTE: Because the Model 8600 does not have an external microphone, you must use
the handset to respond to the caller.
MSG
MSG
6
6
3
1
9