Filter
Top Products
55
Inter-Tel
®
Model 8524/8525/8526 User Guide
MOVING ON
To store a number in a Speed-Dial location:
1. Press and dial .
2. Dial the location code 0-9 to be programmed.
3. Enter the desired name for the speed-dial number to be programmed, as
described below:
• Alphanumeric mode: Press the dialpad buttons to enter the desired charac-
ters. (Refer to the chart on page 63.) The number of times a button is pressed
determines which character is entered. For example, 533266 would enter
“JEAN.” When adjoining characters are located under the same button, press
once to advance to the next character. For example,
66 6667776 would enter “NORM.” (Note that letters correspond to
the letters printed on dialpad buttons 1-9.) Press twice to leave a
space. Press the Backspace button (e.g., ) if you need to back-
space.
NOTE: To use the Backspace button, you must pre-program one of the fea-
ture buttons on your endpoint to use the Backspace button (feature code 314).
Refer to page 59, Programming You Feature Buttons section for details on
how to program the backspace button.
• Press to save the name.
4. Dial the extension number or telephone number to be stored.
• Numeric mode: Press and then press the dialpad buttons to dial
the desired numbers.
NOTE: If your number includes an asterisk, pound, hookflash, or pause,
change the mode to the alphanumeric mode by pressing and then
enter the special character. Press to move to the next space. If
necessary, press the Backspace button (e.g., ) to backspace and
make corrections.
• Press to save the number.
NOTE: To dial outside telephone numbers without first selecting an outgoing line, enter
a line access code (such as the Outgoing Call code “8”) at the beginning of the outside
telephone number.
START 3 8 3
FNC 2
FNC 2
FNC 2
FNC 3
# >
FNC 6
FNC 6
FNC 2
FNC 3
# >