Filter
Top Products
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997
Page 33 of 73
Programming Fax-On-Demand Port
Availability
NOTE: This option is available in both NT and OS/2
versions of AXXESSORY Talk.
In order to help make sure the AXXESSORY Talk has
one or more fax ports available for processing incom-
ing faxes, there is a new database field in the Fax On
Demand programming screen shown below. The field
is called “Maximum Fax On Demand Ports” and it sets
the maximum number of fax ports the system can use
for performing Fax On Demand (either delivering out-
going faxes or importing fax documents from the sys-
tem administrator mailbox). By placing a limit on the
number of Fax On Demand ports, the programmer can
reserve fax ports for receiving incoming faxes through
mailboxes and Call Routing Announcement applica-
tions. For example, if the system has eight fax ports and
the Maximum Fax On Demand Ports field is set to six,
there will be two ports available for faxes received
through mailboxes and Call Routing.
NOTE: If the Maximum Fax-On-Demand Ports field is
programmed to a number that exceeds the actual fax
ports available, the software will automatically adjust
the limit.
Also, to help support this new feature and Fax On De-
mand, the AXXESSORY Talk will now support up to
eight fax ports.
The maximum number of fax ports is set in database
programming. It can be programmed using the “User”
password. However, it cannot be changed through the
mailboxes.
NEW FIELD
→