Icom IC-208H Two-Way Radio User Manual


 
61
11 OTHER FUNCTIONS
Initial set mode
The initial set mode is accessed at power ON and al-
lows you to set seldom-changed settings. In this way,
you can “customize” transceiver operations to suit your
preference and operating style.
Initial set mode items
DD
Entering initial set mode
q While pushing
[SET•LOCK],
push [PWR] for 1 sec. to enter
initial set mode.
w Push
[SET•LOCK]
or [S.MW•MW] to select the desired
item.
e Rotate [DIAL] to select the condition or value.
r Push
[PWR]
momentarily to exit initial set mode.
AT
POWER ON
Active band
Key-touch beep
Time-out timer
Auto repeater*
Squelch attenuator
Microphone sensitivity
Auto power off
DTMF speed
Squelch delay
Data speed
Cooling fan
*Available in the USA version only.
Narrow TX
: Push (front panel); or (microphone)
: Push (front panel); or (microphone)