Icom IC-208H Two-Way Radio User Manual


 
38
6
CALL CHANNEL OPERATION
5
6
Call channel selection
Call channel is pre-programmed memory channel that can be
accessed by simply pushing call channel button.
Push [M/CALL•PRIO] several times to select the call chan-
nel mode then push [BAND] to select the desired call
channel.
• “C1” or “C2” appears instead of memory channel number indi-
cation.
Push [M/CALL•PRIO] several times to select memory mode, or
push [V/MHz•SCAN] to select VFO mode.
Push [MR/CALL] for 1 sec. to select the call
channel mode then push [Y]/[Z] to select the
desired call channel in the main band.
• Push [MR/CALL] to select memory mode, or push
[VFO/LOCK] to select VFO mode.
Call channel transferring
q Push [M/CALL•PRIO] several times then push [BAND] to
select the desired call channel.
• “C1” or “C2” appears.
w Push [S.MW•MW] then rotate [DIAL] to select the memory
channel to transfer the contents.
•“!” indicator and memory channel number blink.
• To transfer to the VFO, select “-- -- --” with [DIAL] then push.
e Push [M/CALL•MW] for 1 sec. to transfer the contents.
z Push [MR/CALL] for 1 sec. then push [BAND]
to select the desired call channel.
x Push [FUNC], [
CLR
A(MW)] momentarily, then
push [Y]/[Z] to select the memory channel to
transfer the contents.
• To transfer to the VFO, push [Y]/[Z ] to select
“-- -- --”.
c Push [FUNC], then [
CLR
A(MW)] for 1 sec. to
transfer the contents.
MR/CALL
MW
BAND
[Y]/[Z]
MR/CALL
[M/CALLPRIO] C1 or C2 appears
INFORMATION
When the VFO mode is
selected from the call channel,
a small c appears instead of
memory channel number.