Icom IC-208H Two-Way Radio User Manual


 
14
2
SETTING A FREQUENCY
2
Lock functions
To prevent accidental frequency changes and unnecessary
function access, use the lock function. The transceiver has 2
different lock functions.
D Frequency lock
This function locks [DIAL] and switches electronically and can
be used together with the microphone lock function.
Push [SET•LOCK] for 1 sec. to turn the lock function ON
and OFF.
• [PTT], [MONI•DTMF] (monitor function only), [VOL] and [SQL]
can be used while the channel lock function is in use. Also,
TONE-1, TONE-2, DTMF tones or DTMF memory contents can
be transmitted from the microphone.
Push [VFO/LOCK] for 1 sec. to switch the
lock function ON and OFF.
D Microphone keypad lock
This function locks the microphone keypad.
Push [FUNC] then [
SQL
Z D(16KEY-L)] to
switch the microphone keypad lock function
ON and OFF.
• [PTT], [VFO/LOCK], [MR/CALL], [BAND], [Y], [Z],
[F-1], [F-2] and [FUNC] on the microphone can be
used.
• All switches on the transceiver can be used.
The keypad lock function is released when the
power is turned OFF then ON again.
16KEY-L
VFO/LOCK
[SETLOCK]
L appears