Filter
Top Products
- 8-2 -
Chapter 8
Web settings
WirelessIP 3000 web settings
Overview
The WirelessIP 3000 is able to be configured via the Internet. The WirelessIP 3000 Web settings can configure detailed settings
that cannot be configured from the device itself.
The Web server for this device needs to be configured to “Enabled” when using the Web settings.
The recommended browser is IE 5.0 or later.
When setting via TELNET:
Firstly, prepare a PC to be used to configure the WirelessIP 3000.
Next, configure the network to connect the PC to the WirelessIP 3000.
Start the browser from the PC to start the WirelessIP 3000 Web settings, http://<host>:and access <port>/
Enter the IP address
or host name for the device into <host> and enter the port number into <port>. (the port number is 8080 and cannot be omitted).
Access restrictions
The authentication screen for logging in to the WirelessIP 3000 web settings is displayed.
Input the username and password that are set in the WirelessIP 3000 phone and log in.
General User
Username User (default)
Password 0000 (default)
Authority
・ Browse Basic Information
・ Edit Phonebook
・ Change User Password
(Note) The same user cannot simultaneously log in from multiple browsers (clients).
General user and admin user are allowed to log in simultaneously.