Filter
Top Products
- 7-3 -
Chapter 7
Maintenance
Network search
Information on signals detected can be displayed.
1
From the maintenance menu,
Select "1. Network search", using the
keys of the key,
then confirm with the key.
2
A message is displayed during the search.
The SSID of the detected access points are displayed after several seconds.
To see detailed information, select the SSID and press the
keys of the
key,
then press the key.
Access points configured to deny ANY connection are not displayed in the
table of detected results. If the detected access point is encrypted, the
SSID is screened and displayed. In addition, at most 20 access points
can be displayed.
3
The following information is displayed.
• Signal (dBm)
• Channel
• Security
• MAC address （MAC address of the access point）
• Mode
• Beacon Interval
Press the key to return to the SSID table.