Filter
Top Products
Grandstream Networks, Inc. GXP1100/1105 User Manual Page 21 of 34
Firmware version: 1.0.1.110 Last Updated: 01/2012
Automatic Upgrade
Default is “No”. Choose “Yes” to enable automatic HTTP upgrade and provisioning.
In “Check for upgrade every” field, enter the number of minutes to check the HTTP
server for firmware upgrade or configuration changes. When set to “No”, the phone
will only perform HTTP upgrade and configuration check once at boot up.
Note: This function is used by ITSP. End user should NOT touch these parameters.
Authenticate Conf File
Default is “No”. If set to “Yes”, configuration file would be authenticated before
acceptance. End user should use default setting.
Enable TR-069
Default is “No”.
ACS URL
URL for TR-069 Auto Configuration Servers (ACS).
TR-069 Username
Enter ACS username for TR-069.
TR-069 Password
Enter ACS password for TR-069.
Periodic Inform
Enable
Enable periodic inform. Default is “No”. If set to YES, device will send inform packets
to the ACS.
Periodic Inform
Interval
When enabling periodic inform, set up the periodic inform interval to send the inform
packets to the ACS.
Connection Request
Username
Enter the connection request username. This is the user name for the ACS to connect
to this device.
Connection Request
Password
Enter the connection request password. This is the password for the ACS to connect
to this device.
Authentication Method
Select the authentication method among “No authentication”, “Basic” or “Digest”.
Connection Request
Port
Enter the connection request port. This is the port for the ACS to connect to this
device.
Offhook Auto Dial
To configure a User ID/extension to dial automatically when the phone is taken
offhook.
Syslog Server
The IP address or URL of System log server. This feature is especially useful for
ITSPs.