Filter
Top Products
Grandstream Networks, Inc. GXP1100/1105 User Manual Page 17 of 34
Firmware version: 1.0.1.110 Last Updated: 01/2012
Advanced Settings: To set advanced network settings, codec settings, language settings and etc.
Account: To configure the SIP account.
Table 10: Device Configuration - Status
MAC Address
The device ID, in HEXADECIMAL format.
This will be used for provisioning and is written on the label in the original box as well
as on the label located on the back panel of the device.
IP Address
This field shows IP address of GXP1100/1105.
Product Model
This field contains the product model information.
Part Number
This field contains the product part number.
Software Version
• Program: This is the main firmware release number, which is always used for
identifying the software (or firmware) system of the phone.
• Boot: Booting code version number
• Core: Core code version number
• Base: Base code version number
• DSP: DSP code version number
• Aux: Aux code version number. By default, it’s “unknown” for GXP110x
System Up Time
This field shows system up time since the last reboot.
System Time
This field shows the current time on the phone system.
Registered
Indicates whether account is registered or not to the related SIP server.
PPPoE Link Up
Indicates whether the PPPoE connection is enabled (connected to a modem).
Service Status
• GUI: shows the GUI status - running or stopped
• Phone: shows the phone status - running or stopped
Core Dump
Download core dump file for troubleshooting when necessary.
Table 11: Device Configuration – Settings/Basic Settings
End User Password
This contains the password for end user to access the Web Configuration Menu.
Users can enter new password here. This field is case sensitive with a maximum
length of 25 characters.
Confirm Password
Enter the end user password again as above to confirm new password.