Filter
Top Products
Grandstream Networks, Inc. GXP1100/1105 User Manual Page 20 of 34
Firmware version: 1.0.1.110 Last Updated: 01/2012
Upgrade Via
This field allows the user to choose the firmware upgrade/config server path method:
TFTP, HTTP or HTTPS.
• TFTP:
GXP110x retrieves the new firmware files or new configuration file from the specified
TFTP server path at boot time. If there is no new firmware file or configuration file, the
system will start the boot process using the existing firmware or config file. If a TFTP
server is configured and new firmware files are retrieved, the new downloaded image
is saved into the Flash memory. (Please do NOT interrupt the TFTP upgrade process
(especially the power supply) as this will damage the device.
• HTTP:
GXP110x retrieves the new firmware files or new configuration file from the specified
URL or IP for the HTTP server. For example:
provisioning.mycompany.com:6688/Grandstream/1.0.0.6
Note: “:6688” is the specific TCP port where the HTTP server is listening; Omit if
using default port 80.
• HTTPS:
GXP110x retrieves the new firmware files or new configuration file from the specified
URL or IP for the HTTP server via a secured HTTP connection. For example:
provisioning.mycompany.com
Note: HTTPS default port is 443.
Firmware Server Path
Defines the server path for the firmware server. It can be different from the
Configuration server which is used for provisioning.
For example:
firmware.mycompany.com:6688/Grandstream/1.0.0.6
Config Server Path
Defines the server path for provisioning; it can be different from the firmware server.
For example:
provisioning.mycompany.com:6688/Grandstream/gxp1100
Firmware File
Prefix/Postfix
Default is blank. If configured, GXP110x will request the firmware file with the
prefix/postfix and only the firmware with the matching encrypted prefix will be
downloaded and flashed into the phone.
Note: This setting is useful for ITSPs. End user should keep it blank.
Config File
Prefix/Postfix
Default is blank. If configured, GXP110x will request the config file with the
prefix/postfix and only the file with the matching encrypted prefix will be downloaded
and flashed into the phone.
Note: This setting is useful for ITSPs. End user should keep it blank.
Allow DHCP Option 43
and Option 66 to
override server
Default is “Yes”. This allows device gets provisioned from the server automatically.