Filter
Top Products
PRI – GSM Multi-Cell Gateway
6
•
Optional - Setting the TCP/IP connections
If you wish to
operate the management application for system management
via internet connection the proper TCP/IP settings should be performed.
Refer to
Chapter 10: TCP/IP Setting.
•
Optional Managing the system via IP connection
In order to manage, configure and monitor the system via IP the system TCP/IP
connections, the Ethernet cables and the PRI Management MS-Windows application
should be properly installed and configured.
Refer to
Chapter 3.2: Management via Internet connection
.
•
Optional Task- Configurations
In order to operate the system ports and use the installed SIM cards a certain setups
should be performed. Refer to the following chapter that match your configuration needs:
Chapter 3.2: Management via Internet connection
Chapter 4: Configuration - Defining Groups of Ports
Chapter 5: Configuration - Port and SIM
Chapter 5.1 Configuration - SIM Card Settings
Chapter 6: Configuration - ISDN Connection Settings
Chapter 6.1: Configuration - ISDN B-Channel-Port Association
•
Optional Task- Monitoring calls
The PRI Management MS-Windows application enables you to monitor calls in real time. It is recommended that
the management application PC will be connected via IP to enable flexible and continues connection with the
monitored system.
Refer to
Chapter 8: Monitoring Calls
•
Optional Task- Making usage reports
The PRI Management MS-Windows application enables you to generate call reports and export
the report files for additional analysis. It is recommended that the management application PC will be connected
via IP to enable flexible and continues connection with the monitored system.
Refer to
Chapter 9: Generating Call Reports
•
Optional Test call Office phone to GSM Cellphone
Make a
test voice call, from your office phone to a GSM Cellphone.
This will enable you to trace problems in your settings and will guide you to trace the root cause of your
operational error if any, to overcome operational problems. If still after all the guidelines and sub tests completed
and you could not still trace the problem, you are referred to
Chapter 12: Troubleshooting and known
issues
.
Refer to
Chapter 11: Operational test.
•
Known issues and Troubleshooting
If you had problem in setting up the system or completed the setups according to this
manual and still there are operational problems refer to the proper chapter of known issues
and troubleshooting.
Refer to
Chapter 12: Troubleshooting and known issues
.