Filter
Top Products
PRI – GSM Multi-Cell Gateway
15
Chapter 3: Basic configurations with the management
application
Launch the Manager Application and Define the Type of Connection
Between the management PC and the
Multi
-Cell system
After installing the manager application, launch it and define the Type of
Connection between the Auxiliary Computer and the Multi-Cell as described below.
1.
Launch the PRI Manager by pressing
on your computer desktop, or by
pressing:
Start > Programs > EuroTech Communications > PRI Manager
.
The PRI Manager window opens.
2. In the toolbar press: .
The Select Connection window opens.
3. The configuration computer can be connected to the Multi-Cell in either of two
connections the
serial RS-232 wire or via Internet. The two options described in the following sub
chapters.