Filter
Top Products
PRI – GSM Multi-Cell Gateway
5
Getting Started
Eurotech Communication
team is glad you have chosen to use the Eurotechs Multi-Cell PR gateway for your needs,
we will do our best to make your installation efforts as well as day-to-day configuration and monitoring tasks be pleasant
tasks as possible. We wish you a smooth operation while greatly saving your office mobile phone calls.
This chapter is your
Map for installation, configuration and monitoring tasks
and includes a short explanation on
each stage as well as references for more elaborated explanations, drawings and examples in other chapters. The
following is a list of tasks you shall perform, where you shall go over it sequentially or skip tasks that are optional and not
required for your current needs. It is advised that you will use the following tasks as your
Do To List
.
Make a print of this chapter and put notes on each stage when completed
(e.g. V mark when done).
•
Mandatory - Check that all Package items are included
Refer to
Check your Package Items
chapter for checking that all items that should
be in your package.
•
Mandatory Install The Management Application
On the PC / Laptop allocated for the system management install the MS-Windows Management Application with
the provided CD.
Refer to
Chapter 2: Installing the Manager Application
chapter for all items that should be in your
package.
•
Mandatory connections
o
Install Power Cable
o
Install Ground Cable
o
Install Antennas
o
Install ISDN cable
o
Install RS-232 (Comport cable) serieal or RJ-45 Ethernet cable
Refer to
Chapter 1: Connecting the Cables
for specific and detailed guidelines.
•
Mandatory General configurations
In order to operate the system a mandatory basic setups should be performed in one of the two
optional connections, serial RS-232 or via Internet. The 1st time configuration is recommended to be performed
via RS-232 while later on configuration, monitoring and reports is recommended to be performed via IP.
Refer to
Chapter 3: Basic configurations with the management application
.
•
Mandatory - 1st time system configuration via RS-232
Use the RS-232 connection and PRI Management MS-Windows application as your 1st time configuration.
You can use this method for later day-to-day management, however
the option to manage your PRI GSM Gateway system via IP is highly recommended as you can
have the management done remotely from the system via internet connection.
Refer to
Chapter 3.1: Management via RS-232
chapter.
Chapter 3: Basic configurations with the management application
and